English- Home
- Stock Categories
- Technical Articles
- Yuken Double Vane pump
- Rexroth PRESSURE RELIEF VALVE
- PAKER Piston Pump
Home>Products>Danfoss Shut-off valves>Danfoss Shut-off valves 148B4639 STC 100 A STR SHUT-OFF VALVE HANDWHEEL
Danfoss Shut-off valves 148B4639 STC 100 A MODELS
Need a CAD or 3D Model?
Danfoss Shut-off valves 148B4639 STC 100 A STR SHUT-OFF VALVE HANDWHEEL
category
Danfoss Shut-off valves
Danfoss Shut-off valves 148B4639 STC 100 A SPECIFICATIONS
Manufacturers 20.8 Weight / LBS of all Danfoss Shut-off valves are represented in our partial list of clients. Contact Gary for a complete Danfoss Shut-off valves 148B4639 STC 100 A STR SHUT-OFF VALVE HANDWHEEL list of clients and projects.
- Danfoss Shut-off valves
148B4639 STC 100 A
- Tillage
- SKF Mudblock seal
- Shaft with inch female thread
- Flange with attachment bolt holes
- Machined steel
- Zinc-coated housing
- 34.9 mm
- 39 mm
-
BND Hydraulic Equipment Manufacturing Co.,Ltd2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Danfoss Shut-off valves 148B4639 STC 100 A STR SHUT-OFF VALVE HANDWHEELTechnology
- 82 mm
- 67 mm
- 168 mm
- 3/4-16 UNF
- 13.5 mm
- 133.35 mm
- 40 mm
- 3.9 mm
- 300 mm
- 800 mm
- -20 °C
- 50 °C
- -50 °C
- 52.7 kN
- 45 kN
- 4.36 kg
- 100 N·m
- 475 N·m
Danfoss Shut-off valves 148B4639 STC 100 A Danfoss Shut-off valves 148B4639 STC 100 A STR SHUT-OFF VALVE HANDWHEELDetails
##Parts Table 1Danfoss Shut-off valves 148B4639 STC 100 A STR SHUT-OFF VALVE HANDWHEEL## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Valve Plate | 35 mm | 17 mm | 0,035 Kg | 50 mm | ||||
| Shoe Plates | 160 mm | 110 mm | 6.5 | Not Applicable | ||||
| Push Rod | 2.688 Inch | 68.275 Millimeter | 2.688 Inch | 68.275 Millimeter | 7.344 | 10.0 | ||||
| Gear Pump | 4.625 Inch | 117.475 Millimeter | 3.938 Inch | 100.025 Millimeter | 25.02 | 0.0 | ||||
| Regulator | 35 | Ball Bearing | 1.816 | 0.0 | ||||
| Friction Plate | 1 Inch | 25.4 Millimeter | 0.75 Inch | 19.05 Millimeter | 0.29 | 0.0 | ||||
| Swash Plate Assy | 1 Piece Solid | 50 mm | 24.6 mm | 2097 | ||||
| Plunger Sliding Boots | 57 000 r/min | 6 ° | 8.841 lb | 6.375 Inch | 161.92 Millimeter | ||||
| Retainer Plate | 55 mm | Set Screw | 6 ° | Plain Inner Ring | 52100 Bearing Steel | Oil Hole and Lubrication Groove | ||||
| Separator | Inner Ring | 10 mm | 55.1 | No Pilot | ||||
| Danfoss Shut-off valves 148B4640 STC 125 A STR SHUT-OFF VALVE CAP | Pilot Pressure:Tillage; Flow:SKF Mudblock seal; Maximum Volume Flow:Shaft with inch female thread; Rate Of Pressure Change:Flange with attachment bolt holes; Torque:Machined steel; Pressurefree Operation:Zinc-coated housing; Voltage:34.9 mm; Maximum Permissible Pilot Pressure:39 mm; Determining Operating Characteristics:82 mm; Maximum Permissible Speed (limit Speed):67 mm; Control Fluid Drain:168 mm; Control Pressure Measurement:3/4-16 UNF; Displacement, geometric, per revolution:13.5 mm; Maximum Axial Force At Standstill:133.35 mm; Moment of inertia rotary group:40 mm; Case volume:3.9 mm; Sequence Valve:300 mm; Nominal Resistance:800 mm; Weight (approx.):-20 °C; Load Pressure:50 °C; Maximum Torque:-50 °C; Maximum angular acceleration:52.7 kN; Rotary stiffness:45 kN; Maximum rotational speed:4.36 kg; Drive Speed:100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
| Danfoss Shut-off valves 148B4632 STC 50 A STR SHUT-OFF VALVE CAP | Control Fluid Drain:Tillage; Maximum Permissible Pilot Pressure:SKF Mudblock seal; Case volume:Shaft with inch female thread; Weight (approx.):Flange with attachment bolt holes; Nominal Resistance:Machined steel; Rotary stiffness:Zinc-coated housing; Maximum Volume Flow:34.9 mm; Flow:39 mm; Drive Speed:82 mm; Drive Power:67 mm; Maximum angular acceleration:168 mm; Pressurefree Operation:3/4-16 UNF; Sequence Valve:13.5 mm; Maximum Axial Force At Standstill:133.35 mm; Pilot Pressure:40 mm; Maximum Permissible Speed (limit Speed):3.9 mm; Voltage:300 mm; Torque:800 mm; Rate Of Pressure Change:-20 °C; Load Pressure:50 °C; Determining Operating Characteristics:-50 °C; Displacement, geometric, per revolution:52.7 kN; Moment of inertia rotary group:45 kN; Maximum rotational speed:4.36 kg; Power:100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
| Danfoss Shut-off valves 148B4637 STC 80 A STR SHUT-OFF VALVE HANDWHEEL | Maximum Permissible Pilot Pressure:Tillage; Flow:SKF Mudblock seal; Load Pressure:Shaft with inch female thread; Case volume:Flange with attachment bolt holes; Control Fluid Drain:Machined steel; Pilot Pressure:Zinc-coated housing; Torque:34.9 mm; Rotary stiffness:39 mm; Maximum Axial Force At Standstill:82 mm; Nominal Resistance:67 mm; Voltage:168 mm; Determining Operating Characteristics:3/4-16 UNF; Power:13.5 mm; Control Pressure Measurement:133.35 mm; Rate Of Pressure Change:40 mm; Sequence Valve:3.9 mm; Drive Power:300 mm; Maximum rotational speed:800 mm; Displacement, geometric, per revolution:-20 °C; Weight (approx.):50 °C; Maximum Torque:-50 °C; Moment of inertia rotary group:52.7 kN; Maximum Volume Flow:45 kN; Drive Speed:4.36 kg; Maximum Permissible Speed (limit Speed):100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
| Danfoss Shut-off valves 148B4642 STC 150 A STR SHUT-OFF VALVE CAP | Weight (approx.):Tillage; Pilot Pressure:SKF Mudblock seal; Power:Shaft with inch female thread; Displacement, geometric, per revolution:Flange with attachment bolt holes; Maximum angular acceleration:Machined steel; Nominal Resistance:Zinc-coated housing; Pressurefree Operation:34.9 mm; Case volume:39 mm; Voltage:82 mm; Control Pressure Measurement:67 mm; Load Pressure:168 mm; Determining Operating Characteristics:3/4-16 UNF; Rotary stiffness:13.5 mm; Drive Speed:133.35 mm; Rate Of Pressure Change:40 mm; Moment of inertia rotary group:3.9 mm; Flow:300 mm; Maximum Permissible Pilot Pressure:800 mm; Control Fluid Drain:-20 °C; Maximum Volume Flow:50 °C; Torque:-50 °C; Maximum Permissible Speed (limit Speed):52.7 kN; Maximum Axial Force At Standstill:45 kN; Maximum rotational speed:4.36 kg; Maximum Torque:100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
| Danfoss Shut-off valves 148B4636 STC 80 A STR SHUT-OFF VALVE CAP | Maximum Axial Force At Standstill:Tillage; Nominal Resistance:SKF Mudblock seal; Maximum Volume Flow:Shaft with inch female thread; Maximum Torque:Flange with attachment bolt holes; Control Fluid Drain:Machined steel; Moment of inertia rotary group:Zinc-coated housing; Pressurefree Operation:34.9 mm; Maximum rotational speed:39 mm; Sequence Valve:82 mm; Drive Power:67 mm; Maximum Permissible Speed (limit Speed):168 mm; Weight (approx.):3/4-16 UNF; Control Pressure Measurement:13.5 mm; Rotary stiffness:133.35 mm; Power:40 mm; Pilot Pressure:3.9 mm; Rate Of Pressure Change:300 mm; Drive Speed:800 mm; Case volume:-20 °C; Voltage:50 °C; Determining Operating Characteristics:-50 °C; Flow:52.7 kN; Torque:45 kN; Load Pressure:4.36 kg; Maximum Permissible Pilot Pressure:100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
| Danfoss Shut-off valves 148B4634 STC 65 A STR SHUT-OFF VALVE CAP | Drive Speed:Tillage; Case volume:SKF Mudblock seal; Maximum Axial Force At Standstill:Shaft with inch female thread; Maximum Permissible Pilot Pressure:Flange with attachment bolt holes; Load Pressure:Machined steel; Power:Zinc-coated housing; Maximum Volume Flow:34.9 mm; Flow:39 mm; Control Pressure Measurement:82 mm; Pilot Pressure:67 mm; Moment of inertia rotary group:168 mm; Maximum Torque:3/4-16 UNF; Determining Operating Characteristics:13.5 mm; Rate Of Pressure Change:133.35 mm; Nominal Resistance:40 mm; Rotary stiffness:3.9 mm; Maximum Permissible Speed (limit Speed):300 mm; Voltage:800 mm; Torque:-20 °C; Maximum angular acceleration:50 °C; Sequence Valve:-50 °C; Control Fluid Drain:52.7 kN; Weight (approx.):45 kN; Pressurefree Operation:4.36 kg; Displacement, geometric, per revolution:100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
| Danfoss Shut-off valves 148B4633 STC 50 A STR SHUT-OFF VALVE HANDWHEEL | Torque:Tillage; Maximum rotational speed:SKF Mudblock seal; Control Pressure Measurement:Shaft with inch female thread; Sequence Valve:Flange with attachment bolt holes; Drive Speed:Machined steel; Maximum Axial Force At Standstill:Zinc-coated housing; Voltage:34.9 mm; Power:39 mm; Weight (approx.):82 mm; Maximum angular acceleration:67 mm; Pressurefree Operation:168 mm; Flow:3/4-16 UNF; Rotary stiffness:13.5 mm; Maximum Permissible Speed (limit Speed):133.35 mm; Maximum Permissible Pilot Pressure:40 mm; Pilot Pressure:3.9 mm; Determining Operating Characteristics:300 mm; Maximum Volume Flow:800 mm; Displacement, geometric, per revolution:-20 °C; Load Pressure:50 °C; Rate Of Pressure Change:-50 °C; Case volume:52.7 kN; Moment of inertia rotary group:45 kN; Drive Power:4.36 kg; Nominal Resistance:100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
| Danfoss Shut-off valves 148B4635 STC 65 A STR SHUT-OFF VALVE HANDWHEEL | Voltage:Tillage; Maximum Torque:SKF Mudblock seal; Control Pressure Measurement:Shaft with inch female thread; Pressurefree Operation:Flange with attachment bolt holes; Rotary stiffness:Machined steel; Nominal Resistance:Zinc-coated housing; Torque:34.9 mm; Moment of inertia rotary group:39 mm; Drive Power:82 mm; Maximum rotational speed:67 mm; Power:168 mm; Load Pressure:3/4-16 UNF; Displacement, geometric, per revolution:13.5 mm; Maximum Volume Flow:133.35 mm; Pilot Pressure:40 mm; Maximum angular acceleration:3.9 mm; Maximum Permissible Speed (limit Speed):300 mm; Maximum Permissible Pilot Pressure:800 mm; Flow:-20 °C; Weight (approx.):50 °C; Maximum Axial Force At Standstill:-50 °C; Rate Of Pressure Change:52.7 kN; Drive Speed:45 kN; Sequence Valve:4.36 kg; Determining Operating Characteristics:100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
| Danfoss Shut-off valves 148B4641 STC 125 A STR SHUT-OFF VALVE HANDWHEEL | Determining Operating Characteristics:Tillage; Pressurefree Operation:SKF Mudblock seal; Flow:Shaft with inch female thread; Maximum Torque:Flange with attachment bolt holes; Maximum Permissible Pilot Pressure:Machined steel; Nominal Resistance:Zinc-coated housing; Torque:34.9 mm; Maximum Permissible Speed (limit Speed):39 mm; Control Pressure Measurement:82 mm; Drive Power:67 mm; Maximum Volume Flow:168 mm; Maximum angular acceleration:3/4-16 UNF; Sequence Valve:13.5 mm; Case volume:133.35 mm; Moment of inertia rotary group:40 mm; Drive Speed:3.9 mm; Rotary stiffness:300 mm; Pilot Pressure:800 mm; Voltage:-20 °C; Displacement, geometric, per revolution:50 °C; Rate Of Pressure Change:-50 °C; Maximum rotational speed:52.7 kN; Maximum Axial Force At Standstill:45 kN; Load Pressure:4.36 kg; Weight (approx.):100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
| Danfoss Shut-off valves 148B4638 STC 100 A STR SHUT-OFF VALVE CAP | Nominal Resistance:Tillage; Power:SKF Mudblock seal; Maximum Axial Force At Standstill:Shaft with inch female thread; Maximum Torque:Flange with attachment bolt holes; Control Pressure Measurement:Machined steel; Voltage:Zinc-coated housing; Maximum rotational speed:34.9 mm; Drive Speed:39 mm; Maximum Permissible Pilot Pressure:82 mm; Moment of inertia rotary group:67 mm; Sequence Valve:168 mm; Torque:3/4-16 UNF; Maximum Volume Flow:13.5 mm; Flow:133.35 mm; Drive Power:40 mm; Pressurefree Operation:3.9 mm; Load Pressure:300 mm; Maximum Permissible Speed (limit Speed):800 mm; Weight (approx.):-20 °C; Rotary stiffness:50 °C; Control Fluid Drain:-50 °C; Maximum angular acceleration:52.7 kN; Rate Of Pressure Change:45 kN; Pilot Pressure:4.36 kg; Case volume:100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
| Danfoss Shut-off valves 148B4643 STC 150 A STR SHUT-OFF VALVE HANDWHEEL | Rate Of Pressure Change:Tillage; Control Pressure Measurement:SKF Mudblock seal; Maximum Volume Flow:Shaft with inch female thread; Sequence Valve:Flange with attachment bolt holes; Moment of inertia rotary group:Machined steel; Rotary stiffness:Zinc-coated housing; Nominal Resistance:34.9 mm; Maximum angular acceleration:39 mm; Voltage:82 mm; Control Fluid Drain:67 mm; Maximum rotational speed:168 mm; Load Pressure:3/4-16 UNF; Determining Operating Characteristics:13.5 mm; Drive Power:133.35 mm; Maximum Permissible Pilot Pressure:40 mm; Drive Speed:3.9 mm; Maximum Axial Force At Standstill:300 mm; Flow:800 mm; Pressurefree Operation:-20 °C; Case volume:50 °C; Torque:-50 °C; Weight (approx.):52.7 kN; Maximum Permissible Speed (limit Speed):45 kN; Displacement, geometric, per revolution:4.36 kg; Power:100 N·m; Recommended tightening torque for self-locking shaft nut:475 N·m; |
Danfoss Shut-off valves 148B4639 STC 100 A STR SHUT-OFF VALVE HANDWHEEL Video
Contact Us
- BND Hydraulic Equipment Manufacturing Co.,Ltd
- AddressVia Giotto, 3, 10080 San Benigno Cavanese, Torino, Italy
Danfoss Shut-off valves 148B4639 STC 100 A Technical Articles
| Can a hydraulic gear pump be used as a motor? |
| How do you calculate the power of a hydraulic motor? |
| How much HP does a hydraulic pump need? |
Danfoss Shut-off valves CATEGORIES
- Yuken Double Vane pump
- Rexroth PRESSURE RELIEF VALVE
- PAKER Piston Pump
- DENISON vane pump
- Yuken Piston pump
- Rexroth Vane pump
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Yuken pressure valve
- Rexroth check valve
- Rexroth Solenoid directional valve
- Rexroth Piston Pump
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
Customers Who Viewed Danfoss Shut-off valves 148B4639 STC 100 A Also Viewed
Danfoss Shut-off valves 148B4643 STC 150 A STR SHUT-OFF VALVE HANDWHEEL
Danfoss Shut-off valves 148B4642 STC 150 A STR SHUT-OFF VALVE CAP
Danfoss Shut-off valves 148B4641 STC 125 A STR SHUT-OFF VALVE HANDWHEEL
Danfoss Shut-off valves 148B4640 STC 125 A STR SHUT-OFF VALVE CAP
Danfoss Shut-off valves 148B4639 STC 100 A STR SHUT-OFF VALVE HANDWHEEL