Yuken A145-L-R-04-H-A-S-A-60366 Piston pump

Seal:Silicone; d:50; Fit:J7; Bearing Inner Dia. Shape:Tapered hole adapter; Stroke:No; Unit Body Material:Cast Iron; Accessory:With steel plate cov; Diameter series symbol:For Heavy Load; Machining:No; Diameter series symbol:For Heavy Load;

Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Width T(mm):10; Volume Discount:Available; RoHS:6; Type:Bearings with Housin; Shape:Flange Type; Number of Bearings:Single;

T min.:-20 °C; d:74.61 mm; H3:160; T max.:200 °C; A2:62.5 mm; S:33.3 mm; Designation of bearing:UC215-47G2T20; L:220 mm; N:19mm; J:184 mm;

Cylinder shape (suffix symbol: X):No; Shaft Bore Config.:Cylindrical Bore; Basic Load Rating, Dynamic Rating(N):450000; Specifications/Environment:Standard; Symbol of Bearing Ring Shape:No symbol: Internal; High-Speed Steel:Standard; Inner/Outer Ring Material:Steel; D:260; Specifications:Standard; R

Jmax:356 mm; Seal:LO619; L:410.00 mm; A2:191 mm; UPC Code:999999999; Housing:SNT 522-619; Lockwasher:MB19; N1:32.00 mm; J:350.00 mm; Jmin:344 mm;

Width B:69.850 mm; Backing Shaft Diameter ds:128.8 mm; Bore d:110 mm; Thermal Speed Ratings - Oil:2400 rpm; O.D. D:200.000 mm; Backing Housing Diameter Ds:182.3 mm; Static Load Rating Co:790 kN; Type:WS; Dimension S2:4.29 mm; Weight:20.300 lb;

Outer Race Width:0.438 Inch | 11.125; Category:Single Row Ball Bear; Noun:Bearing; B:11.11 mm; Enclosure Type:Contact Seal; Precision Class:ABEC 1 | ISO P0; Max operating temperature, Tmax:110 °C; Radial clearance class:CN; Maximum Capacity / Filling Slot:No; Other Features:Deep Groove | Miniat;

Days to Ship:7 Days; Bearing Part Number:624; Number of Bearings:Double; Flange Shape:Square Type; Seals:DD (Contact Rubber S; Holder Surface Treatment:Clear Anodize; Type:Bearings with Housin; Volume Discount:Available; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):4;

A5:25.4 mm; G:M6x1; S:17.5 mm; C:25.7 kN; L3:64 mm; L:129 mm; N1:16 mm; s1:21.45 mm; H:102 mm; Recommended tightening torque for set screw:8 Nm;

Housing Width:6.5 in; Dimension J:19.0 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension M:7.0 in; Seal Type:Felt Type; Series Type:Light Series; Dimension H2:15.9 in; Cor - Static Load Rating:131513 lbf; Support Type:Four-Bolt Plummer Bl; Dimension H:7.126 in;

Locating Rings (width x OD):SR140X12.5; C0 Static Load Rating:254; Max Oil Speed:4800; Bolt Qty:2; UPC Code:999999999; Housing Mass:9.70 Kg; End Cover2:EC516-613; Max Grease Speed:3900; C1 Dynamic Load Rating:259; Material :Cast Iron;

B:26 mm; Mass:1.4 kg; Da max:131 mm; da min:89 mm; rs min:2 mm; Min operating temperature, Tmin:-20 °C; ra max:2 mm; Dynamic load, C:72.5 kN; Characteristic rolling element frequency, BSF:5.6 Hz; d:80 mm;

Design Unit:METRIC; Bearing Weight:1.7 Kg; Cg - Geometry Factor8:0.0547; R - Inner Ring To Clear Radius1:1.5 mm; UPC Code:087796023284; Y2 - ISO Factor6:3.07; B - Inner Ring Width:31 mm; d:75 mm; D:130 mm; Superseded Part:22215CJW33C3;

Bearing Retained:No; Volume Discount:Available; Bearing I.D. d(mm):15; Bearing Retained:No; Shape:Flange Type; Width T(mm):25; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Seals:DD (Contact Rubber S;

Bearing UPC:013992033703; Cr - Dynamic Load Rating:118025 lbf; Dimension M:7.0 in; Maximum Speed:1600 rpm; Housing Width:7.2 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H:7.126 in; Seal Type:Felt Type; Series Type:Medium Series; Dimension J:19.5 in;